Get Creative with DIY Toilet Paper Covers

Get Creative with DIY Toilet Paper Covers

Table of Contents:

1. Introduction
2. Materials Required
3. Cutting the Fabric
4. Sewing the Cover
5. Adding the Elastic
6. Finishing with a French Seam
7. Putting the Cover on the Toilet Paper
8. Conclusion

How to Make a Toilet Paper Cover: A Step-by-Step Guide

Introduction: Toilet paper covers are a fun and practical way to spruce up your bathroom decor. If you have some fabric scraps, elastic, and basic sewing skills, you can easily create your own custom toilet paper cover. In this tutorial, we will walk you through the process of making a toilet paper cover using a fat quarter and elastic. So let's get started!

Materials Required: Before we dive into the project, let's gather all the materials you will need. For this project, you will need:

• Fat quarter fabric
• Elastic
• Scissors
• Ruler
• Rotary cutter
• Sewing machine
• Safety pin
• Iron
• Thread

Cutting the Fabric: To begin, open up your fat quarter fabric and cut it into a perfect square. The size we will be aiming for is 18 by 18 inches, but this may vary depending on the size of your fat quarter. Line up the salvage edge and cut off the salvage to create a clean line. Then, using a ruler and rotary cutter, square off the edges to achieve the desired size.

Sewing the Cover: Now that we have a square piece of fabric, it's time to start sewing the cover. Firstly, fold the fabric in half with right sides together and sew a quarter-inch seam along the open side. This will create a tube-like shape. Flip the fabric right side out and iron the seam flat.

Adding the Elastic: Next, we will create two channels on either side of the cover for the elastic. Using a sewing machine, sew a 3/8 inch seam along both sides of the cover, leaving one end open. This will create the channels through which we will thread the elastic.

Finishing with a French Seam: After sewing the channels, it's time to thread the elastic through them. You can use a turn stick or a safety pin to help guide the elastic through the channels. Leave about 10-11 inches of elastic inside the cover and tie it securely with a triple knot. Trim off any excess elastic.

Putting the Cover on the Toilet Paper: Now that the cover is complete, it's time to put it on the toilet paper. Simply slide the cover over the top of the toilet paper roll, align the hole with the paper, and push the excess fabric towards the center to hold the roll in place. The stretchy bottom of the cover will keep everything secure.

Conclusion: Creating a custom toilet paper cover is a simple and enjoyable DIY project that adds a touch of personality to your bathroom. By following these step-by-step instructions, you can make your own toilet paper cover using just a few materials. So why not give it a try and transform your bathroom with a personalized touch?

Highlights:

• Learn how to make a custom toilet paper cover using a fat quarter and elastic
• A fun and practical way to spruce up your bathroom decor
• Easy DIY project with basic sewing skills
• Step-by-step instructions with clear illustrations

FAQ Q&A: Q: Can I use any fabric for the toilet paper cover? A: Yes, you can use any fabric that you like. Fat quarters are a popular choice because they already come in a square shape and are readily available.

Q: How long does it take to make a toilet paper cover? A: The process of making a toilet paper cover can be completed in under an hour, making it a quick and satisfying project.

Q: Can I wash the toilet paper cover? A: Yes, you can wash the cover as needed. Simply remove the elastic before washing and rethread it once the cover is dry.

Q: Can I adjust the size of the cover? A: Absolutely! Feel free to adjust the dimensions of the fabric to fit your specific toilet paper roll. Just remember to make sure the cover has a snug fit.

Q: Can I make multiple covers with different fabrics? A: Yes, you can make multiple covers using different fabrics to match your bathroom decor or change them seasonally for a fresh look.