DIY Mayor + Oogie Boogie Costumes

DIY Mayor + Oogie Boogie Costumes

Table of Contents:

1. Introduction
2. The Mayor Costume 2.1 Materials needed 2.2 Painting the Mayor's face 2.3 Making the Mayor's hat 2.4 Completing the Mayor's look
3. Oogie Boogie Costume 3.1 Materials needed 3.2 Modifying the mask 3.3 Creating the body shape 3.4 Adding stitches and details 3.5 Covering the face with burlap 3.6 Finishing touches
4. Conclusion

The Nightmare Before Christmas Costumes: Transforming Into the Mayor and Oogie Boogie

Are you a fan of Tim Burton's "The Nightmare Before Christmas"? Do you want to bring the beloved characters to life through your Halloween costume? If so, you've come to the right place! In this article, we will guide you through the process of creating stunning and authentic costumes for two iconic characters from the movie: the Mayor and Oogie Boogie.

The Mayor Costume

To start off, let's focus on the Mayor costume. Here's what you'll need and the steps involved:

Materials needed

Before diving into the costume-making process, gather the following materials:

• Lampshade from a thrift store
• Various paints in peachy pink, light blue, white, and black
• Sponge brush
• Pencil
• Green, gray, and mustard-colored paint (for the eyes and hat)
• Foam poster board
• Gray felt
• Gray suit coat jacket
• White dress shirt
• Black slacks
• Spider accessory
• Mayor award pin

Painting the Mayor's face

Begin by preparing the Mayor's face. Use the lampshade as a base, removing any wrapping. Paint the front side with a peachy pink color and the back with a light blue shade. Remember to refer to a picture for accurate facial details. Add peachy pink accents to the cheeks and outline the lips and bottom of the face with the same color. Paint the teeth using bright white paint and outline everything with black using a fine-tipped paint brush. Draw lines for the teeth and enhance the eyes with a darker green shade.

Making the Mayor's hat

To create the Mayor's distinctive hat, use foam poster board and cut it to the appropriate width based on the bottom of the hat. Roll up regular poster board and glue it together to form the top portion of the hat. Attach it to the bottom part using hot glue. Finally, add a small piece of gray felt to the bottom of the hat for the finishing touch.

Completing the Mayor's look

To complete the Mayor's appearance, wear a gray suit coat jacket, a white dress shirt, and black slacks. Pin a spider accessory to the shirt and don't forget to wear the mayor award pin for added authenticity.

Oogie Boogie Costume

Next, let's move on to the Oogie Boogie costume. Here's a breakdown of the process:

Materials needed

Gather the following materials before creating the Oogie Boogie costume:

• Dollar Tree mask
• Poster board
• Air-dry modeling clay
• Brown and black felt
• Black mesh
• Burlap
• Black jute
• Stuffing

Modifying the mask

Start by modifying the Dollar Tree mask to fit Oogie Boogie's unique facial features. Glue a piece of poster board to the mask to extend the mouth area. Use air-dry modeling clay to mold the shape of Oogie Boogie's face, placing emphasis on the absence of a nose. Aim for large, bulging eyes and prominent lips. Allow the clay to dry for at least 24 hours.

Creating the body shape

After preparing the mask, it's time to create the body shape for Oogie Boogie. Trace around your leg and arm to get the proportions right. Glue two pieces of the body shape together, leaving the tops open to accommodate your arms and feet. Use black jute to create the signature stitches on Oogie Boogie's body.

Adding stitches and details

Emphasize the stitches by adding more black jute to the body shape. Stuff the body shape with stuffing, gluing felt panels on the front and back for additional texture. Turn the body shape inside out to reveal the finished product.

Covering the face with burlap

Cover the mask with burlap, molding it to the facial contours using hot glue. Cut the excess burlap, ensuring that the mask still fits comfortably on your head. Glue another piece of burlap on the inside for a neat finish.

Finishing touches

To complete the Oogie Boogie costume, add stuffing to the tip of the hat for volume. Use tan paint to add shadows on the lips and eyes. Add brown felt to the mask to provide a base layer for the burlap. Use black felt to shape the mouth. The costume is now ready to be worn, with the top of the costume conveniently secured with velcro for easy removal.

Conclusion

By following the steps outlined in this article, you can recreate the iconic costumes of the Mayor and Oogie Boogie from "The Nightmare Before Christmas." Whether you're attending a Halloween party or simply want to celebrate your love for the movie, these costumes are sure to impress. Get ready to step into the magical world of Halloween Town and bring these beloved characters to life!

Highlights:

• Detailed step-by-step instructions for creating the Mayor and Oogie Boogie costumes from "The Nightmare Before Christmas"
• Materials list for each costume
• Tips and tricks for achieving an authentic look
• Importance of referencing pictures and using appropriate paints and fabrics
• Emphasis on creativity and personalization in the costume-making process
• Cost-saving alternatives to expensive pre-made costumes

FAQ: Q: Can I use different colors for the Mayor's face? A: Yes, you can experiment with different colors to achieve your desired look. Just make sure to stay true to the character's features.

Q: Can I use a different type of mask for Oogie Boogie? A: While Dollar Tree masks are readily available and affordable, you can certainly use a different mask as long as it can be modified to suit the character's facial features.

Q: How long does it take to complete these costumes? A: The time required may vary depending on your experience and available resources. However, it's best to allocate several days to ensure ample drying and assembly time.