DIY Harry Styles Crochet Tote Bag: Inspired by JW Anderson Cardigan!

DIY Harry Styles Crochet Tote Bag: Inspired by JW Anderson Cardigan!

Table of Contents

1. Introduction
2. Materials Needed
3. Starting the Project: Creating a Slip Knot
4. Chaining the Loops
5. Single Crocheting
6. Creating the Crochet Squares
7. Lay Out the Squares
8. Sewing the Squares Together
9. Making the Second Side of the Tote Bag
10. Sewing the Two Panels Together
11. Crocheting the Tote Bag Strap
12. Attaching the Strap to the Bag
13. Finishing Touches
14. Conclusion

Introduction

Welcome to this crochet tutorial where I will teach you how to make a Harry Styles color block tote bag. This trendy accessory is inspired by the famous JW Anderson cardigan often worn by Harry Styles. If you're a fan of Harry Styles and love the cardigan's style but don't have the time or patience to make the entire cardigan, this project is perfect for you. In this tutorial, I will guide you through the step-by-step process of creating your own crochet tote bag.

Materials Needed

Before we get started, let's make sure you have all the necessary materials for this project. You will need:

1. Pair of scissors
2. Plastic needle
3. 5.5 millimeter crochet hook
4. Variety of colors of yarn (size 4)
   • Black, Hunter Green, Carrot (Super Saver brand)
   • Butter, Bright Red (Craft Smart brand)
   • Hot Blue (Sugar and Cream brand)

Now that you have all the materials ready, let's dive into the crochet process!

Starting the Project: Creating a Slip Knot

To begin crocheting your tote bag, we'll start by creating a slip knot. Here's how you can do it:

1. Wrap the yarn twice around your fingers.
2. Take the loop on the left and place it over the loop on the right.
3. Take the new loop on the left and put it over the loop on the right.
4. Carefully remove your finger and place the crochet hook inside the circle.
5. Pull on the yarn to tighten it around the crochet hook.

Chaining the Loops

Now that we have our slip knot, we'll proceed to chain the loops. This will create the foundation for our crochet squares. Here's how you can do it:

1. Wrap the yarn around the crochet hook.
2. Pull the yarn through the loop to create the first chain.
3. Repeat this process for a total of 15 loops.
4. If you need assistance, refer to the previous steps or watch the video tutorial for a visual guide.

Single Crocheting

With the loops chained, we'll now move on to single crocheting. This stitch will form the base for our crochet squares. Here's how you can do it:

1. Find the first hole in the chain.
2. Insert the crochet hook through the loop.
3. Yarn over and pull the yarn through the first loop only.
4. Yarn over again and pull the yarn through both loops.
5. Repeat this process until you reach the end of the chain.
6. Chain one loop and turn your work.
7. Continue the single crochet process for 14 more rows or until you have an even square shape.

Creating the Crochet Squares

Now that we have our basic square shape, we'll need to create more crochet squares to complete the tote bag. For our project, we'll need a total of 24 squares. Here's how you can create them:

1. Cut the yarn, leaving approximately two to three inches from the crochet hook.
2. Yarn over, pull through, and tighten the loop by pulling on the yarn.
3. Repeat this process to create a total of 24 crochet squares.
4. To match the design in the tutorial, crochet four black squares and five squares each of green, orange, red, and yellow.

Lay Out the Squares

Now that we have our crochet squares, it's time to lay them out in the desired pattern. Make sure to arrange them according to the design shown in the tutorial video. This will help you visualize the final look of your tote bag.

Sewing the Squares Together

To transform the crochet squares into a cohesive tote bag, we'll need to sew them together. Here's how you can do it:

1. Thread the plastic needle with the blue yarn and cut a piece of yarn ranging from 12 to 24 inches.
2. Find two leftover strands from the crochet squares and tie them together. For example, you can tie the orange square with the black square.
3. Attach the blue string and tie it to any previously leftover yarn you can find.
4. Fold two crochet squares on top of each other and sew them together horizontally.
5. To do this, insert the needle through the top of the orange and green square and pull the string tight.
6. Repeat this step until you have sewed across one side of the square completely.
7. Close off the blue yarn by placing the needle through the last visible loop and pulling it tight.
8. Repeat the above steps to attach the remaining panels of four squares each.

Making the Second Side of the Tote Bag

Now that we have completed one side of the tote bag, we'll move on to creating the second side. Follow the same process as before: lay out the squares according to the design and sew them together to form panels. Once the panels are ready, we can proceed to join them vertically.

Sewing the Two Panels Together

To assemble the tote bag, we'll need to sew the two panels together vertically. Here's how you can do it:

1. Take the panel that begins with black and ends in yellow.
2. Turn it so that the excess strings are all exposed.
3. Place the panel that begins with orange and ends with red on top of it, following the design shown in the video.
4. Take the blue yarn and the needle, and sew together the two panels.
5. Start in the top right corner and end in the top left corner, making sure to sew only three of the four sides.
6. Keep the top open to create the opening of the tote bag.

Crocheting the Tote Bag Strap

To complete our tote bag, we'll crochet the strap. This strap will allow you to comfortably carry the bag. Here's how you can do it:

1. Crochet a single stitch, similar to what we did for the crochet squares.
2. This time, create a chain of seven loops.
3. You can decide the length of the strap according to your preference. In the tutorial, the strap was crocheted to be approximately 23 inches long.
4. Adjust the length of your strap accordingly.

Attaching the Strap to the Bag

Now that we have the strap ready, it's time to attach it to the tote bag. Follow these steps to do it correctly:

1. Open the bag and place the first side of the strap on the inside.
2. Sew it together with the blue yarn, ensuring that the strap is not twisted.
3. Repeat the same process with the other side of the strap.
4. Double-check that the strap is securely attached before moving on to the final step.

Finishing Touches

With the strap attached, the tote bag is now taking its final shape. To give it a clean finish, follow these steps:

1. Take your scissors and cut the excess yarn, ensuring a neater and more polished look.
2. Trim any loose threads for a clean and professional appearance.

Conclusion

Congratulations! You have successfully completed your crochet Harry Styles color block tote bag. This trendy accessory is the perfect addition to any Harry Styles fan's wardrobe. Whether you're attending a concert, going shopping, or simply strolling around town, this tote bag will stylishly carry your belongings. I hope you found this tutorial useful and enjoyed the process of creating your own unique tote bag. Happy crafting!

Highlights:

• Learn how to crochet a Harry Styles color block tote bag inspired by the famous JW Anderson cardigan.
• Perfect for fans of Harry Styles who want to incorporate his style into their accessories.
• Requires basic crochet skills and a variety of yarn colors in size 4.
• Step-by-step instructions provided to guide you through the process.
• Create a trendy and unique tote bag for a Harry Styles concert or any summer outing.
• Customize the design by choosing your preferred yarn colors and patterns.

Frequently Asked Questions

Q: Do I need prior crochet experience to make this tote bag? A: Some basic crochet skills are required to complete this project, but it is suitable for beginners. The tutorial provides clear instructions and visuals to help you through the process.

Q: How long does it take to crochet the tote bag? A: The time it takes to complete the tote bag will vary depending on your crochet speed and experience. On average, it may take a few hours to a couple of days to finish the project.

Q: Can I use different colors or customize the pattern? A: Absolutely! Feel free to choose your preferred yarn colors and experiment with different patterns. This project allows for customization and personalization.

Q: Is the tote bag durable and sturdy? A: When properly sewn and constructed, the tote bag should be durable and able to carry your belongings. However, keep in mind that crochet items may stretch over time, especially when carrying heavy items.

Q: Can I make the tote bag smaller or larger? A: Yes, you can adjust the size of the tote bag by modifying the number of crochet squares and the length of the strap. Feel free to customize it according to your preferences.

Q: Can I sell the tote bags I make using this tutorial? A: Yes, you can sell the tote bags you make. However, please respect any copyright or trademark restrictions related to the design. It's always a good idea to credit the original inspiration when selling handmade items.

Q: Where can I find the video tutorial for this project? A: You can find the video tutorial on [the channel mentioned in the text content]. Make sure to watch the video alongside the written instructions for a comprehensive understanding of the project.

Q: Are the materials for this project easily accessible? A: Most of the materials needed for this project, such as the crochet hook and yarn, can be found in craft stores or online. Make sure to check the specific brand and color recommendations mentioned in the tutorial for accuracy.