DIY Hanging Sloth Planter: Tips and Visuals

Table of Contents

1. Introduction
2. Supplies Needed
3. Making the Eyes
4. Assembling the Face
5. Starting the Head
6. Closing up the Hole in the Back
7. Attaching the Head to the Planter
8. Claw and Arm Assembly
9. Placing the Head onto the Body
10. Sewing on the Arms and Back Limbs
11. Securing the Handle onto the Dowel or Driftwood
12. Adding the Sloth to the Hanger
13. Finalizing the Sloth Planter

Introduction

In this tutorial, we will be working on creating a sloth hanging planter. This adorable sloth planter will add a touch of nature and whimsy to your home decor. It can be customized with your choice of colors and will make the perfect addition to any plant lover's collection. Let's get started!

Supplies Needed

Before we begin, make sure you have the following supplies:

• Four colors of yarn (buff, cream, dark brown, and black)
• Scissors
• Tapestry needle
• Stitch markers
• Ruler
• H 5mm hook (for the majority of the sloth)
• E 3.5mm hook (for the eyes and face)
• Plastic cup or container for the liner
• Driftwood or wooden dowel for hanging
• Glue gun (optional, for securing the sloth to the hanger)

Making the Eyes

To start, we will be making the eyes for our sloth. Follow these steps:

1. Chain 4 and work on both sides of the chain, placing single crochets.
2. Work the eye rounds by placing single crochets in the back bumps of the chain.
3. Create three single crochets in the last chain back bump to help us turn.
4. Repeat the process on the other side of the chain to have three single crochets on each end.
5. Slip stitch to join and cut the yarn, leaving a long tail for sewing.

Assembling the Face

Next, we will assemble the face of our sloth. Here's how:

1. Place the eyes approximately a stitch or two apart on the head.
2. Sew the mouth onto the face and embroider the nose in the middle of the eyes.
3. Use the long tail from the mouth to sew on the nose.
4. Embroider the nose by looping the yarn through a few times.

Starting the Head

Now, let's start working on the head of our sloth:

1. Work in the back loops only of the outer edge of the face.
2. Slip stitch to join in the back loop only.
3. Chain one and continue with the head instructions.

Closing up the Hole in the Back

To close up the hole in the back of the sloth's head, follow these steps:

1. Go through the front loops and pull the tail to cinch it closed.
2. Tie off the yarn in the back, leaving an extra-long tail for sewing.

Attaching the Head to the Planter

Now, it's time to attach the head of the sloth to the planter:

1. Thread the long tail of the head through the back of the planter.
2. Thread it through the middle of the side of the head.
3. Pull it tightly to secure the head to the planter.

Claw and Arm Assembly

Let's work on the assembly of the claws and arms:

1. Insert the hook between rounds 1 and 2 to attach a claw.
2. Tie the claw together to create a point.
3. Attach the claw onto the hand using the two tails.
4. Tie the ends of the claws onto the handle when instructed.

Placing the Head onto the Body

In this step, we will place the head of the sloth onto the body:

1. Position the head about the corner and middle of the mouth.
2. Sew the head onto the body between rows 12 and 11, all the way down to rows 8 and 9.
3. Cover about a two-stitch space to securely attach the head.

Sewing on the Arms and Back Limbs

Next, let's sew on the arms and back limbs of our sloth:

1. Sew the arms at an angle from rounds 11 to 13, with three stitches away from the head on the bottom corner and four stitches away from the head on the top corner.
2. Set the back limbs at an angle, with about four stitches between the top edges and eight stitches between the bottom hinges.

Securing the Handle onto the Dowel or Driftwood

To secure the handle onto the dowel or driftwood, follow these steps:

1. Weave the ends of the handle through the hole in the wood.
2. Repeat the process a couple of times to ensure it is secure.
3. Weave the ends in through the single crochet to conceal them.

Adding the Sloth to the Hanger

Finally, it's time to add the sloth to the hanger:

1. Leave the tails of the claws and tie them through the ends of the handle.
2. Tie them securely, just like we did with the ends of the handle.
3. Hang the sloth planter in your desired location.

Finalizing the Sloth Planter

Congratulations! Your sloth hanging planter is now complete. Add your favorite plant to the planter and enjoy the charming addition to your home decor. Remember to water and care for the plant regularly.

Article

Introduction

Adding a touch of nature to your home decor has never been easier with the sloth hanging planter. This adorable creation will surely melt your heart and bring a smile to your face every time you see it. In this tutorial, we will guide you through the process of making your very own sloth planter, step by step. Let's dive in and unleash our creativity!

Supplies Needed

Before we start crafting, gather the following supplies:

• Four colors of yarn: Buff, cream, dark brown, and black. These colors will help bring our sloth to life.
• Scissors: Essential for cutting the yarn and other materials.
• Tapestry needle: Used for sewing and weaving in loose ends.
• Stitch markers: Useful for marking specific points in your work.
• Ruler: Helps to ensure accuracy and precision in measurements.
• H 5mm hook: This hook will be predominantly used for creating the sloth's body.
• E 3.5mm hook: Smaller hook size for crafting the eyes and face.
• Plastic cup or container for the liner: To prevent water from spilling onto surfaces, a plastic cup or container will serve as a liner.
• Driftwood or wooden dowel for hanging: Choose a unique piece of driftwood or a wooden dowel to give your sloth planter character.
• Glue gun (optional): If you want extra security, a glue gun can be used to attach the sloth to the hanger.

Now that we have everything we need, it's time to bring our sloth planter to life!

Making the Eyes

The eyes are the window to the soul, even for a sloth planter! Let's start by creating the eyes:

1. Chain 4 and work on both sides of the chain, placing single crochets.
2. Work the eye rounds by placing single crochets in the back bumps of the chain.
3. Create three single crochets in the last chain back bump, giving the eyes dimension.
4. Repeat the process on the other side of the chain to have three single crochets on each end.
5. Slip stitch to join and cut the yarn, leaving a long tail for sewing.

Assembling the Face

Now that we have our eyes, it's time to assemble the face of our sloth:

1. Position the eyes approximately a stitch or two apart on the head.
2. Sew the mouth onto the face using your tapestry needle.
3. Embroider the nose in the middle of the eyes, following the desired shape.
4. Use the long tail from the mouth to sew on the nose, creating a charming little button.
5. Embroider the nose by looping the yarn through a few times, adjusting the number of loops as desired.

Starting the Head

With the face complete, it's time to move on to the head:

1. Work in the back loops only of the outer edge of the face to create the head.
2. Slip stitch to join in the back loop only, securing the head in place.
3. Chain one and continue working on the head as instructed.

Closing up the Hole in the Back

To ensure our sloth's head is seamless, let's close up the hole in the back:

1. Go through the front loops and pull the tail to cinch the hole closed.
2. Tie off the yarn in the back, leaving an extra-long tail for sewing.

Attaching the Head to the Planter

Now that the head is complete, it's time to attach it to the planter:

1. Thread the long tail of the head through the back of the planter.
2. Thread it through the middle of the side of the head, securing it in place.
3. Pull it tightly to ensure the head is firmly attached to the planter.

Claw and Arm Assembly

Let's move on to the adorable claws and arms of our sloth:

1. Insert the hook between rounds 1 and 2 to attach a claw.
2. Tie the claw together to create a pointy end, resembling a real sloth claw.
3. Attach the claw onto the hand using the two tails and secure it in place.
4. Use the ends of the claws to tie them onto the handle when instructed.

Placing the Head onto the Body

The head is ready, and it's time to place it onto the body of our sloth planter:

1. Position the head about the corner and middle of the mouth, forming a seamless connection.
2. Sew the head onto the body between specific rows, ensuring a snug fit.
3. Cover about a two-stitch space to securely attach the head, creating a unified look.

Sewing on the Arms and Back Limbs

Our sloth is taking shape! Let's sew on the arms and back limbs:

1. Sew the arms at an angle, mirroring the natural positioning of a sloth's limbs.
2. Ensure that the top edge of the front limb is about four stitches away from the back limb.
3. Stitch approximately three stitches away from the head at the bottom corner of the arm.
4. Keep the top corner of the arm approximately four stitches away from the head.
5. For the back limbs, position the top edge about four stitches apart and the bottom edge about eight stitches apart.
6. Sew the limbs carefully, ensuring they are securely attached to the body.

Securing the Handle onto the Dowel or Driftwood

Our sloth planter needs a place to hang from, so let's secure the handle onto the dowel or driftwood:

1. Weave the ends of the handle through the hole in the wood, ensuring stability.
2. Repeat the weaving process a couple of times to ensure a secure attachment.
3. Weave the ends through the single crochet to conceal them, creating a polished look.

Adding the Sloth to the Hanger

It's time to hang our adorable sloth planter! Follow these steps to add it to the hanger:

1. Leave the tails of the claws and tie them through the ends of the handle, firmly securing them.
2. Tie the ends of the claws just like we did with the ends of the handle, ensuring a durable attachment.
3. Find the perfect spot to hang your sloth planter and make sure there are no holes in the plastic liner.
4. If needed, acquire another cup or container with holes in the bottom for proper drainage.
5. Place your desired plant in the cup and voila! Your sloth planter is complete.

Finalizing the Sloth Planter

Congratulations! You have successfully created your own sloth hanging planter. Now, sit back, relax, and enjoy the beauty and whimsy it brings to your home decor. Don't forget to water and care for your plant regularly to keep it thriving.

Highlights

• Create an adorable sloth hanging planter to add a touch of nature to your home decor.
• Choose from four colors of yarn to customize your sloth's appearance.
• Learn how to make the eyes, assemble the face, and start the head of your sloth planter.
• Securely attach the head to the planter and sew on the arms and back limbs for a complete look.
• Use a driftwood or wooden dowel to hang your sloth planter and add a unique touch to its design.
• Add the finishing touches by attaching the sloth to the hanger and ensuring proper drainage for your plant.

FAQ

Q: Can I use different colors of yarn for my sloth planter? A: Of course! Feel free to choose any colors that resonate with your personal style and home decor.

Q: How long does it take to complete the sloth hanging planter? A: The time required depends on your crochet skills and familiarity with the techniques used. It typically takes several hours to complete.

Q: Can I use a different type of hanger instead of driftwood or a wooden dowel? A: Absolutely! You can use any hanger that suits your preferences, whether it be a metal rod, plastic dowel, or even a decorative hook.

Q: Can I hang my sloth planter outdoors? A: While the sloth planter is primarily designed for indoor use, you can certainly hang it outdoors in a covered area where it won't be directly exposed to the elements.

Q: Can I customize the size of my sloth planter? A: Yes, you can adjust the size of your sloth planter by using different yarn weights and hook sizes. Keep in mind that this will also affect the overall appearance and proportions of the finished product.