Colorful Flower Top Pencil Cover Crochet Hook Grip

Table of Contents:

1. Introduction
2. Choosing the right colors
3. Setting up the loom with staggered pins
4. Creating the triangle shape
5. Adding layers to the design
6. Removing the bottom layer
7. Continuing the pattern
8. Growing the cover out between the pins
9. Adding additional layers
10. Finishing off the pencil cover
11. Conclusion

Introduction

In this article, we will learn how to make a flower top pencil cover or grip using a loom. This tutorial will guide you step by step through the process of creating a unique and colorful cover for your pencil. Whether you want a grip for comfort or a full-length cover, this tutorial has got you covered.

Choosing the right colors

Before we start, it's important to choose the colors you want to use for your pencil cover or grip. Rainbow colors work great for creating a vibrant and eye-catching design. Consider the length of your cover and adjust the number of bands accordingly. If you're making a cover that spans the entire length of your pencil, you'll need around 150 bands. For just a grip, you'll need fewer bands.

Setting up the loom with staggered pins

To create a unique design, we will set up the loom with the pins in a staggered position. This means the pins will not be in a straight line but will have a diagonal pattern. Make sure the arrows on the loom are facing towards you. We will be working with just six pins in a triangular shape.

Creating the triangle shape

Start by placing your first band on the right-hand row, on the third pin in from the end of the loom. Stretch the band diagonally to the left and twist it. Continue working diagonally up and to the left, twisting the bands as you go. Then, go diagonally to the right and up, back into the middle row. Complete the triangle shape by going diagonally to the right again, always twisting the bottom layer of bands.

Adding layers to the design

To add depth and complexity to the design, we will add additional layers. Repeat the same pattern from the right-hand side, going diagonally into the middle. You can use a different color for each layer to create a rainbow effect. After adding the second layer, remove the bottom layer by grabbing the bottom two bands and pulling them over the top and into the middle.

Removing the bottom layer

Removing the bottom layer helps create a three-dimensional effect. Start on the same pin where you began and grab the bottom two bands, pulling them out and over the top. Continue moving around the loom, removing the bottom two bands from each pin. The center pin will be a bit tricky to grab, so make sure to push back on the upper bands to get a better view.

Continuing the pattern

Now that you have removed the bottom layer, you can continue adding layers to your design. Follow the same pattern, starting on the same pin where you began, and work your way around the triangle. Make sure to push down the lower bands to create space for the new ones. Repeat the process of removing the bottom layer after adding each new layer.

Growing the cover out between the pins

As the cover grows, you may need to adjust its position on the loom. If you're using a rainbow loom with open pins, you can let the cover grow down through the open area. However, if you're using a different type of loom, you'll need to maneuver the cover out between two pins. Use your hook to gently force the cover to grow in the desired direction.

Adding additional layers

Continue adding layers to your design, alternating colors to create a visually appealing pattern. Push the lower bands down to make room for the new ones. Remember to remove the bottom layer after each round. Experiment with different color combinations and patterns to make your pencil cover or grip unique.

Finishing off the pencil cover

Once your pencil cover or grip has reached the desired length, it's time to finish it off. Start on the right-hand side, where there should be two bands on all the pins. Take these two bands and move them diagonally into the middle row, creating four bands on that pin. Remove the excess bands by reaching your hook down through the middle, pushing back on the top two bands, and grabbing the bottom two bands. Work your way around the triangle, repeating this process until you have only two loose bands on your hook. Secure the loose ends with a slipknot and hide the loop within the cover.

Conclusion

Congratulations! You have successfully created a beautiful flower top pencil cover or grip using a loom. Whether you choose to cover the entire length of your pencil or create a grip, your design is sure to stand out. Feel free to experiment with different colors and patterns to make your pencil cover or grip truly unique.

Article: How to Make a Flower Top Pencil Cover or Grip Using a Loom

In this tutorial, we will guide you through the step-by-step process of creating a flower top pencil cover or grip using a loom. With just a few materials and some basic techniques, you can turn an ordinary pencil into a colorful and fun accessory.

Introduction

Are you tired of plain and boring pencils? Do you want to add a touch of personality to your writing utensils? Look no further! In this tutorial, we will show you how to make a flower top pencil cover or grip using a loom. This easy and creative project will not only make your pencils look more vibrant but also provide a comfortable grip while writing or drawing.

Choosing the Right Colors

Before we dive into the process, let's talk about color selection. Choose colors that you love and that reflect your personality. For a vibrant and eye-catching design, consider using rainbow colors. You can also experiment with different color combinations to create unique effects. Keep in mind the length of your cover or grip. If you want to cover the entire length of your pencil, you will need approximately 150 bands. For a grip, you will require fewer bands.

Setting Up the Loom with Staggered Pins

To create an interesting and visually appealing design, we will set up the loom with staggered pins. This means the pins will not be in a straight line, but instead, they will have a diagonal pattern. Make sure the arrows on the loom are facing towards you, and arrange the pins in a triangular shape using six pins. This setup will allow you to create intricate flower patterns on top of the pencil cover or grip.

Creating the Triangle Shape

Now that the loom is set up, it's time to start creating the triangle shape. Begin by placing your first band on the third pin of the right-hand row, counting from the end of the loom. Stretch the band diagonally to the left and twist it. Continue in a diagonal direction, moving up and to the left, and twist each band as you go. Once you reach the top row, go diagonally to the right and up, back into the middle row. Complete the triangle shape by going diagonally to the right again. Remember to always twist the bottom layer of bands to create a secure structure for your pencil cover or grip.

Adding Layers to the Design

To add depth and complexity to your design, we will be adding multiple layers. Start by repeating the same pattern on the right-hand side, going diagonally into the middle. You can use a different color for each layer to create a beautiful rainbow effect. As you add each layer, push down the lower bands to create space for the new ones. This will help maintain the shape and structure of your cover or grip.

Removing the Bottom Layer

After adding layers, it's important to remove the bottom layer to achieve a three-dimensional effect. Starting at the same pin where you began, grab the bottom two bands and pull them over the top and into the middle. Proceed to remove the bottom two bands from each pin, working your way around the loom. Be mindful that the center pin may be a bit tricky to grab, so push back on the upper bands to get a better view. This step will give your pencil cover or grip a polished and finished look.

Continuing the Pattern

After removing the bottom layer, continue adding layers to your design by following the same pattern. Start on the same pin where you began and work your way around the triangle, adding bands and twisting as necessary. Ensure the lower bands are pushed down to leave room for the new layers. Repeat the process of removing the bottom layer after each round of adding new bands. This repetition will create an intricate and visually appealing pattern on your pencil cover or grip.

Growing the Cover Out Between the Pins

As your pencil cover or grip grows, you may need to adjust its position on the loom. If you're using a rainbow loom with open pins, you can simply let the cover grow down through the open area. However, if you're using a different type of loom, you'll need to gently maneuver the cover out between two pins. Use your hook to carefully force the cover to grow in the desired direction, ensuring it maintains its shape and integrity.

Adding Additional Layers

Continue adding layers to your design, alternating colors to create a visually stunning pattern. Push the lower bands down after each layer to create space for the new bands. Keep in mind that the length of your cover or grip is up to you. You can make it as long or as short as you prefer. Feel free to experiment with different color combinations and patterns to make your pencil cover or grip uniquely yours.

Finishing Off the Pencil Cover

Once your pencil cover or grip has reached the desired length, it's time to finish it off. Start on the right-hand side, where there should be two bands on all the pins. Take these two bands, get them on your hook, and move them diagonally into the middle row. This will create four bands on that pin. To remove the excess bands, reach your hook down through the middle, push back on the top two bands, and grab the bottom two bands. Work your way around the triangle, repeating this process until you have only two loose bands on your hook. Secure the loose ends with a slipknot, making it nice and tight. To hide the loop, slide it through adjacent bands, ensuring it stays securely in place.

Conclusion

Congratulations! You have successfully created a beautiful flower top pencil cover or grip using a loom. Whether you chose to cover the entire length of your pencil or create a comfortable grip, your design is sure to impress. By following these steps and letting your creativity flow, you can transform ordinary pencils into unique works of art. So grab your loom, choose your colors, and get ready to add a splash of excitement to your writing or drawing experience. Happy looming!

Highlights:

• Create a flower top pencil cover or grip using a loom
• Choose vibrant rainbow colors or unique color combinations
• Set up the loom with staggered pins for an interesting design
• Add layers to create depth and complexity
• Remove the bottom layer for a three-dimensional effect
• Continue the pattern to build the cover or grip
• Learn how to grow the cover out between the pins
• Experiment with different color combinations and patterns
• Finish off the cover with a secure slipknot
• Enjoy a unique and personalized pencil accessory!

FAQ:

Q: What materials do I need to make a flower top pencil cover? A: To make a flower top pencil cover, you will need a loom, bands in your chosen colors, and a hook.

Q: How many bands do I need for a full-length pencil cover? A: For a full-length pencil cover, you will need approximately 150 bands. However, this may vary depending on the thickness of the bands and the size of your pencil.

Q: Can I use this technique for crochet hooks or loom hooks? A: Yes, you can also use this technique to create covers or grips for crochet hooks or loom hooks. Simply adjust the size of the loom to fit the hook you are using.

Q: How do I remove the pencil cover once it's finished? A: To remove the pencil cover, simply slide it off the pencil and replace it with a new one. The slipknot at the end of the cover will keep it securely in place.

Q: Can I customize the design with different patterns? A: Absolutely! You are encouraged to experiment with different patterns and color combinations to create unique designs that reflect your personal style. Let your creativity shine!

Q: Can I make a longer grip instead of a full-length cover? A: Yes, you can choose to make a grip that covers only a portion of the pencil. Simply adjust the number of bands and the length of the cover according to your preference.

Q: Is this suitable for beginners? A: This tutorial is suitable for beginners and experienced loomers alike. The step-by-step instructions will guide you through the process, making it easy to create a stunning pencil cover or grip.